Crestliner 16 and Go Devil: Difference between revisions

From RHPWiki
Jump to navigationJump to search
Newer edit →
VisualWikitext
Originate, from other notes.
 
Split logs
Line 1: Line 1:
[[Go devil Activity log]]
[[Go Devil Maintenance Log]]
Parts
Parts


Line 10: Line 13:


Propeller SWC 9x6, was 9x7.
Propeller SWC 9x6, was 9x7.
Maintenance Log
9/ /03, Purchased boat motor and trailer from Walter Combs, 18 hours
10/24/03 Oil change, 26 hours.
8/15/04 Oil Change, 46 hours.
4/30/05 Oil, filter and extended oil drain plug. 67 hours
5/27/06  Oil, filter, 109 hours
4/29/07 Oil, filter, plugs, 145 hours
5/13/07 Air filter
9/26/07 Prop and lower seals, 167 hours.
5/24/21 Prop and nut and grease seal change, Prop was 9x6 SWC, Donna mentioned 9x5. About 250 hours. Changed Tach (& Hours meter).
6/18/2026 Sleeved grooved shaft with SKF Speedi-Sleeve 99811. Used JB Weld metal epoxy under sleeve to fill groove. Replaced grease seals.

Revision as of 23:31, 18 June 2026

Go devil Activity log Go Devil Maintenance Log

Parts

Oil filter: NAPA 1056, Fram 8172, Wix 51056

Air filter:

Spark Plugs: Champion 3071, Autolite 3924, Champion RC12YC

Oil: 0F-100F, 10W-30, mineral; -20F-0F, 5W-20 or 5W-30, synthetic; Capacity with filter, 2.1 qt

Propeller SWC 9x6, was 9x7.

Retrieved from "https://www.pellessier.com/wiki/144/index.php?title=Crestliner_16_and_Go_Devil&oldid=179"